Ultra HD Measurement Microscope SGO-KK209
image acquisition system
using domestic Hass HD2 million pixels, 1080P resolution, HDMI output, 60/fps high-speed image capture, no smearing or delay phenomenon; The new function of suppressing strong reflection can meet the observation of high reflection products and reduce the reflection. The edge contour enhancement mode improves the definition of the volume image and makes the image more clear and stereoscopic. Can take pictures, measurement, image contrast storage function.
optical system
infinity optical system, variable magnification ratio1:7.15, objective zoom range 0.7x ~ 5.0x, standard working distance 105mm; Modular design is adopted, and CCD receiver or additional objective lens can be selected to meet the magnification selection from 21x to 150x.
Pillar support
standard column bracket, base size320*285*32mm, column height 300mm, lifting range can reach 280mm focusing range 105mm, which can meet the observation of oversized workpieces, and two-dimensional moving platform and bottom light source can be selected according to requirements.
light source
5W high brightness LED ring light source, adjustable brightness, 100000 hours long life, less heat, soft and natural stroboscopic light.
Display
ConfigurationAOC23.8/21.5 "HD display adopts HDMI HD output, 1080P real-time resolution, and the screen adopts IPS technology. The color presentation is more brilliant and real, restoring the most real product features.
|
Main Functions |
||
|
|
take pictures |
After clicking the button, the page photo can be stored to the storage device. |
|
|
Preview |
Click the button and jump to the storage device to view the content of the photo or video. |
|
|
Settings |
Click the button to bring up the Settings function page. |
|
|
measurement |
Click the button to call up the measurement function page |
|
Optical System Specifications |
optical lens |
5C |
|
optical zoom ratio |
1:7.15 |
|
|
objective magnification |
0.7X-5.0X |
|
|
camera eyepiece magnification |
0.4X |
|
|
optical magnification |
0.28X-2.0X |
|
|
video magnification |
20X-137X |
|
|
field of view |
2*3.5-13.7*24.5mm |
|
|
working distance |
105mm |
|
|
center distance |
120mm |
|
|
CCD System Specifications |
resolution |
1920*1080P |
|
Sensor Dimensions |
magnesium 1/2 |
|
|
Pixel Size |
3.75 microns * 3.75 microns |
|
|
Data Bits |
12BIT |
|
|
Exposure Method |
line-by-line exposure |
|
|
HDR |
Tertiary Enhancement |
|
|
SE |
tertiary edge enhancement |
|
|
White Balance |
Manual/Automatic |
|
|
Focus mode |
Manual |
|
|
Output Frame Rate |
60fps |
|
|
Output mode |
HDMI Digital HD |
|
|
Output Color |
color/black and white |
|
|
power output |
12V1A |
|
|
Fixed Bracket System Specifications |
focusing frame |
Coarse movement focusing handwheel, focusing handwheel tightness adjustable, lifting stroke 0-105mm |
|
Force arm bracket |
50*60*300mm |
|
|
working platform |
320*285*32mm |
|
|
Lighting System Specifications |
external light source |
LED ring light, input voltage: AV100-240V wide voltage, brightness continuously adjustable. |
|
Video Display System Specifications |
Screen Specifications |
21.5 |
|
Screen Ratio |
16:9 |
|
|
measurement function |
picture shooting |
BMP/JPG/PNG |
|
storage method |
U disk |
|
|
Identification function |
point coordinates, crosshairs, coordinate lines, text notes |
|
|
length measurement |
straight line, polyline, curve, arc, parallel line distance, dot line distance. |
|
|
center distance measurement |
two points fixed circle, three points fixed circle. |
|
|
geometric measurement |
line length, line spacing, circle radius, concentric circles. |
|
|
geometric area |
circle area, square, triangle, polygon. |
|
|
angle measurement |
internal angle and external angle measurement. |
|
|
image rotation |
vertical rotation, horizontal rotation. |
|
|
Other Functions |
text editing, annotation |
Measurement Interface Description
|
|
coordinate point: after clicking the mouse, click the mark at any point in the interface to display the coordinate value. |
|
circle radius measurement: after clicking the mouse button, click any point in the interface to determine the center of the circle, click the second time to determine the distance from the center of the circle, and the measurement is displayed as a radius. |
|
|
two-point circle: after clicking the mouse button, click at any point in the interface to determine the point on the circle, click for the second time to determine the diameter distance from the point, and the measurement is displayed as a radius. |
|
three points to fix the circle: after the mouse clicks the button, click at any point in the interface to determine the point on the circle, click for the second time to determine the diameter distance from the point, click for the third time to determine the distance from the second point on the circle, and the measurement is displayed as radius. |
|
|
cross line: after the mouse clicks the button, click the mark at any point in the interface to display the horizontal and vertical lines and the coordinate values of the point |
|
straight line: after clicking the mouse button, click at any point in the interface to determine the starting point, click the second time to determine the distance between the starting point and the end point, and measure the length of the straight line. |
|
|
circle center distance: after clicking the mouse button, you can select three circle drawing methods, draw circles according to the appeal circle drawing method, and measure the distance between the two circles. |
|
concentric circles: after clicking the mouse button, click at any point in the interface to determine the center of the circle, click for the second time to determine the distance from the center of the circle, click for the third time to determine the distance from the center of the circle, and measure the radius of the two circles. |
|
|
polyline measurement: after clicking the mouse button, click at any point in the interface to determine the starting point, click for the second time to determine the distance between the starting point and the end point and turn to the starting point of the new straight line, and the measurement is shown as the total length. |
|
angle measurement: after clicking the mouse button, determine the starting point at any point in the interface, click the second time to determine the straight line, click the third time to determine the straight line between the second point, and measure the included angle between the two straight lines. |
|
|
point-to-line distance: after clicking the mouse button, click at any point in the interface to determine the starting point, click for the second time to determine the straight line, click for the third time to determine the vertical distance from the straight line, and measure the length of the vertical straight line. |
|
rectangle: after the mouse clicks the button, click at any point in the interface to determine the right angle position, click for the second time to determine the area of the rectangle and measure the area occupied by the rectangle |
|
|
curve measurement: after clicking the mouse button, click at any point in the interface to determine the starting point, the length of the mouse path, the second click to determine the end point, and measure the length of the drawing line. |
|
arc length measurement: after clicking the mouse button, click at any point in the interface to determine the starting point, click for the second time to determine the straight line, and the third point to determine the straight line with the second point. After the three-point solitary size, the arcsine function and radius are measured. |
|
|
parallel lines: after the mouse clicks the button, click at any point in the interface to determine the starting point, click the second time to determine the straight line, click the third time to determine the position of the parallel straight line, and measure the distance between the two parallel lines. |
|
Polygon: After clicking the button with the mouse, click at any point in the interface to determine a corner, and add a corner for each click to measure the area occupied by the polygon. |
|
|
Annotation: After the mouse clicks the button, the marquee is called up for character annotation. |
|
coordinate system: after the mouse clicks the button, the center of the interface is the origin, the horizontal and vertical lines to the origin are displayed, and the scale is displayed. |
|
|
Finish: Click the mouse button to complete the use of the current measurement tool. |
|
delete: after clicking, call up the delete tool, click the interface measurement to delete |
|
|
Delete All: Click to delete all measurement data in the interface. |
|
screenshot: After clicking, save the interface screenshot to the storage space. |
Software Interface Introduction
|
|
automatic exposure |
the mouse click the switch to automatically set the shutter speed and aperture value |
|
|
Exposure |
the mouse to adjust the shutter speed |
|
|
White Balance |
mouse click on the box to select automatic and one-click calibration white balance reference point |
|
|
anti-flicker |
select the anti-flicker frequency 50Hz or 60Hz according to the mains frequency by clicking the box with the mouse |
|
|
Reset |
mouse click to restore page setup to default settings |
|
|
Contrast |
the mouse to adjust the brightness of the white screen left and right to increase the contrast |
|
|
saturation |
the mouse to adjust the brightness of the color |
|
|
brightness |
the mouse to adjust the brightness of the screen |
|
|
sharpness |
the mouse to adjust the contrast of the edge of the image, the left is automatically |
|
|
noise reduction |
the mouse to adjust the image left and right noise reduction, the leftmost is automatic |
|
|
red |
the mouse to adjust the size of the three primary colors of red in the image |
|
|
green |
the mouse to adjust the size of the three primary colors of green in the image |
|
|
Blue |
the mouse to adjust the size of the three primary colors of blue in the image |
|
|
color temperature |
the temperature when adjusting the color of the emitted light left and right with the mouse |
|
|
Zoom in |
click the mouse button to enlarge the image in the screen |
|
|
horizontal mirroring |
mouse click button image horizontal symmetry flip |
|
|
monochrome image |
mouse click button |
|
|
HDR |
mouse button click to turn on high dynamic range image mode |
|
|
Shrink |
mouse click the button to reduce the image in the screen |
|
|
Vertical Mirror |
mouse click button image vertically symmetrical flip |
|
|
image still |
click the mouse button to make the image in the screen still |
|
|
image contrast |
mouse click the button to compare the image with the photo |
|
|
Select Grid |
mouse click the button to select the grid layer, a total of eight layer selection |
|
|
Grid Switch |
mouse click button for grid switch |
|
|
Reset Grid |
mouse click button to reset the current layer grid |
|
|
Save Grid |
mouse click button |
|
|
Select Line |
the mouse to click the button to select the line, horizontal line eight, vertical line eight, a total of 16 |
|
|
line switch |
mouse click the button to switch the selected line |
|
|
line color |
mouse click on the button to change the selected line color, a total of nine color options |
|
|
line width |
mouse click button to change the selected linethickness, a total of four kinds of thickness selection |
