Video Microscope Installation Procedure

Unlike other optical instruments, the video microscope is a relatively magnifying device. Other types of microscopes can be used with the eyes directly facing the eyepiece. The use of video microscopes is similar to that of electron microscopes. The following is a detailed introduction to the installation steps of the video microscope by Xiaobian.

1. Before installing the video microscope, assemble the large parts first, and then assemble the universal bracket. During assembly, the lens of the microscope and the bracket of the camera should be placed below, and the bracket supporting the display should be placed above. The position should not be wrong. Only by installing in the correct way can the use of the video microscope be guaranteed.

2. Microscopes are fragile, so special attention must be paid when installing them. In particular, the installation of the lens must be carefully placed inside a circle on the universal bracket, so as to fix the lens, and then install the camera on the lens. Be careful, otherwise it will easily affect the use effect of the video microscope.

3. After the bracket and lens are installed, then everyone needs to fix the monitor and connect some connecting wires in the correct way.

4. After these installation steps are completed, the surrounding environment is relatively dark when using the video microscope, so the light source can be installed on it, so that it can have enough light to observe the product.

before using the video microscope, everyone can install it step by step according to the steps introduced by the above editor, then after installation, they can use the microscope to observe related products. As long as it is installed in accordance with the correct steps, there will be no problems during use, and the observation effect can be guaranteed.